NLCleaning and maintenance
5.
Clean the sieve elements under
running water.
2.
Pull the lower spray arm upwards.
Carefully clean the dirt edge between
the coarse and fine sieve.
6.
Assemble the screening system.
Check that the coarse sieve locking
cams are engaged.
7.
Insert the sieve system into the
device and turn the coarse sieve
clockwise.
Check that the arrow marks are
opposite each other.
3.
Check the nozzles of the spray arms
for blockages under running water
and remove any foreign objects.
Cleaning spray arms
Limescale and impurities in the wash
water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
4.
Install the lower spray arm.
aThe spray arm audibly clicks into place.
1.
Unscrew the upper spray arms
Pull .
5.
Fit and screw on the upper spray
arms.
and down loose-
1
2
42
