2 Introduction
2
Introduction
The SR35iA Aperio Controller enables a communication link from the Bewator Entro to
the ASSA ABLOY Aperio™ door solutions. The Omnis security system can then
manage the door environments via the BAPSI protocol.
2.1
Prerequisites
Following equipment are required:
l
Bewator Entro SR35iA Aperio Controller (RS485)
l
8, 16 or 32 door models.
l
Bewator Entro software environment
l
Omnis software environment
l
ASSA ABLOY Aperio™ hubs (RS485)
l
ASSA ABLOY Aperio™ door locks (wireless)
l
Aperio™ Key License file
l
Cables between SR35iA Aperio Controller and the Aperio™ hubs
l
Power supplies
2.2
System capacity
Following limits applies when using the Aperio™ together with Bewator Entro and
Omnis:
Maximum number of Aperio™ hubs per
SR35iA Aperio Controller
15 hubs
Maximum number of Aperio readers
(doors) per
Aperio™ hub
8 readers/doors. (Recommended by ASSA
is 4).
Maximum number of doors per SR35iA
Aperio Controller (regardless of number
of hubs)
SR35iA/8
SR35iA/16
SR35iA/32
8
16
32
Maximum RS485 cable length
1200 m
Maximum distance between Aperio™
hub and Aperio™ Reader
5 m (typical)
25 m ( at best conditions - like "free space")
Please consult ASSA Abloy for more
information).
Offline cards
The Aperio™ tool has to be used to con-
figure up to 10 cards in autonomous mode.
Supported security levels
Unlocked*
Group code
Card and Card+PIN
Toggle - Group code, Card or Card+PIN
Accompanied Access - Card or card+PIN
Locked
* See
System limitations [➙6]
5
Siemens AB
2015-05-05
Security Products
