manualshive.com logo in svg

Siemens SpeedStream 5450, User Manual, Page: 72 / 83

Share
Download
Siemens SpeedStream 5450 User Manual Download Page 72

5450 Four-Port Router User’s Guide

 

Monitoring Gateway Health

 

Update Firmware 

This feature updates the firmware of your router through the Internet or from a device connected to your 
router. This option may not be available on your router configuration. If available, you must be logged in 
as the router Administrator to access the utility. 

To access this feature, click the 

Update Firmware

 button from your “

Gateway Health

” window. This 

displays the “System Update” window. 

 

Select one of the following download options to start the download process. 

•

 

Remote

 

Checks the Internet for the appropriate upgrade file. This is the recommended method. 

•

 

Local

 

Download the firmware update from a location on your network and select the upgrade file. Before 
doing this, you must download the upgrade file to your computer. 

Important

: Do not turn off or interrupt the router during a firmware upgrade session. The router could be 

rendered inoperable! 

67

 

Summary of Contents for SpeedStream 5450




















































































Reviews:

No comments