manualshive.com logo in svg

Siemens SpeedStream 5450, User Manual, Page: 24 / 83

Share
Download
Siemens SpeedStream 5450 User Manual Download Page 24

5450 Four-Port Router User’s Guide

  

SpeedStream Gateway Setup

 

6. Click 

Next

. This displays the “Configure Time Zone” window. 

 

 

 

Optionally set the time zone of the area of the world in which you live on the “Configure Time Zone” 
window. This option must be enabled to define time of day restrictions for users. 

7. 

To set the time zone, select the 

Yes

 option for 

Enable Time Client

.  

8. 

Select your time zone from the 

Select Time Zone

 drop-down menu, then click 

Next

. This displays 

the “Finish” window. 

9. 

On the “Finish” window, click 

Finish

. This displays the “What do I do now?” window. From this 

window you may click one of the following: 

•

 

Surf Now

 

Your Web browser re-directs you to default home page of the Web browser you are using. You 
may return to the router’s configuration interface at anytime should you choose to further configure 
the router. 

•

 

Continue

 

Displays the “

Home

” window where you can create usage profiles/rules for different users, change 

the level or type of security used on the router, or define/configure your network to be managed by 
the router. 

19

 

Summary of Contents for SpeedStream 5450




















































































Reviews:

No comments