manualshive.com logo in svg

Siemens SpeedStream 5450, User Manual, Page: 43 / 83

Share
Download
Siemens SpeedStream 5450 User Manual Download Page 43

5450 Four-Port Router User’s Guide

 

Configuring Advanced Features

 

Home Network 

The Home Network option displays all network-related information. You must be logged in as the 
administrator to access this option. To use the Home Network option: 

1. Click 

the 

Home Network

 button on the 

Gateway Options

 pane. This displays the “Home Network” 

window containing information about the home network. 

 

 

2. Optionally, 

click 

Advanced

 

Settings 

to display a list of advanced features that allow you to manage 

the computers on your network. This displays the “Advanced Home Networking” window.  

 

 

The advanced options are listed below. To access one of these options, click its link on the “Advanced 
Home Networking” window. 

IP Network

Define the range for assigning IP addresses. 

Server Ports

Specify the ports used by common applications such as HTTP, FTP, 
and Telnet. 

LAN/WAN Port

Configure Ethernet port #4 as either a LAN (network) port or as a 
WAN (Internet connection) port.  

UPnP

 

 

Configure UPnP. UPnP allows the Gateway to communicate directly 
with certain Windows operating systems.  

 

38

 

Summary of Contents for SpeedStream 5450




















































































Reviews:

No comments