Siemens SN65ZX40CE Information For Use Download | Manualshive

Page: 6 / 56

background image

en

Safety

6

Contact between the appliance and installation lines may lead to a
defect in these lines, e.g. gas pipes and power lines. Gas from a
corroded gas pipe can ignite. A damaged power line can cause a
short circuit.

▶

Check that there is a distance of at least 5 cm between the ap-
pliance and installation lines.

WARNING ‒ Risk of injury!

Hinges move when opening and closing the appliance door and
can cause injury.

▶

If built-under or integrable appliances are not in a cavity so that
one side is accessible, the hinge area must be covered at the
side. Covers are available from Customer Service or specialist
outlets.

WARNING ‒ Risk of tipping!

Improper installation may cause the appliance to tip up.

▶

Only install built-under or integrable appliances under a continu-
ous worktop that is securely connected to adjacent cabinets.

1.5 Safe use

WARNING ‒ Risk of serious harm to health!

Failure to comply with safety instructions and directions for use on
packagings of detergent and rinse aid products may cause seri-
ous harm to health.

▶

Follow the safety instructions and directions for use on the
packagings of detergent and rinse aid products.

WARNING ‒ Risk of explosion!

Adding solvents to the interior of the appliance may cause explo-
sions.

▶

Never add solvents to the interior of the appliance.

«
...
4
5
6
7
8
...
»

Summary of Contents for SN65ZX40CE

























































Reviews:

No comments

Related manuals for SN65ZX40CE

Brand: Hyundai power products Pages: 36

Brand: Hotpoint Ariston Pages: 24

Brand: Daewoo Pages: 33

Brand: Sammic Pages: 28

Brand: Parmco Pages: 28

MVWC300VW - Centennial Washer

Brand: Maytag Pages: 20

Brand: Zanussi Electrolux Pages: 28

Brand: Gorenje Pages: 24

Brand: Kogan Pages: 19

Brand: Hotpoint Pages: 16

Brand: Hoover Pages: 88

Brand: Hotpoint Pages: 16

Brand: Hoonved Pages: 21

Brand: GE Pages: 16

Brand: Zanussi Pages: 32

Brand: Zanussi Pages: 16

WA50N7350A Series

Brand: Samsung Pages: 144

Brand: Samsung Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands