Siemens SN65ZX40CE, Information For Use

Page: 37 / 56

Basic settings
en
37
Basic setting Display text Selection Description
Wi-Fi Cn:00 Cn:00 - Cn:01 Switch the wireless network
connection on or off.
Level "Cn:00" switches the
wireless network connection
off.
The basic setting "Wi-Fi" is
only available once the ap-
pliance is connected to the
Home Connect app.
→
"Home Connect ",
Page 38
Remote Start rc:01 rc:00 - rc:02 Activate or deactivate
→
"Remote Start ",
Page 39 .
The following settings are
possible:
¡
With the setting "rc:00",
the function is perman-
ently deactivated.
¡
With the setting "rc:01",
the function can be selec-
ted via the button.
→
"Activating Remote
Start ", Page 39
¡
With the setting "rc:02",
the function is perman-
ently activated.
This basic setting is not
available until after you have
connected the device with
the Home Connect app.
→
"Home Connect ",
Page 38
Factory setting rE: Start with
Y:ES
Confirm with Restore changed settings to
the factory settings.
The settings for initial start-
up must be configured.
1
Factory setting (may vary according to model)
15.2 Changing basic settings
1.
Open the appliance door.
2.
Press ⁠.
3.
To open the basic settings, press
for 3 seconds.
a The display shows H:xx.
a
The display shows ⁠.
4.
Press repeatedly until
the display shows the required set-
ting.