Private Communication Systems
Mobile Phones
3.2.5Disassembling the Bottom Part of the Base
1.
First remove the battery baseplate.
2.
Then remove the battery contact strip.
3.
Finally, remove the charge contacts.
3.3Assembling the SL10
Caution!
Inside the telephone there are three flexible cables, which are very sensitive to any kind of
mechanical damage. Please be careful during all the assembling process not to damage them
e.g. by bending or snapping.
3.3.1Assembling the Bottom Part of the Base
Insert the charge contacts, the battery contact strip and the
battery baseplate.
Make sure that you insert the baseplate in the right way, because
otherwise you will have to reopen the phone again (See figures
below).
Service Manual SL10
V1.1
PN MP ST
R. Fleuren
Sm_sl10_lvl2_v11.doc
Page
10
of 23
05/98
Not o.k.
o.k.
