Siemens SITRANS WM300 MFA, Operating Instructions Manual

Page: 41 / 82

Parameter assignment
6.5 Slow speed
SITRANS WM300 MFA
Operating Instructions, 08/2018, A5E45090709-AA
41
6.5.5 Slow speed (P013)
For relay output Q2
Over speed setpoint shall indicate when the process speed of the target device has
increased past a safe working speed/rotation within the process. Enter the number of
seconds between pulses in an under speed situation.
● P013: xxx Seconds
Values Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I4 – Over speed alarm output relay Q2
Run display features seconds between pulses for probe A and B and relay output status.