Siemens SITRANS T3K PA, Instruction Manual

Page: 116 / 130

Betriebsanleitung/Instruction Manual 7NG3213
116
SITRANS T3K PA
C79000-B7174-C55-04
Max_Diag_Data_Len = 14
Slave_Family = 12
;------- Description of device related diagnosis: -----------------
;
Unit_Diag_Bit(16) = ”Error appears”
Unit_Diag_Bit(17) = ”Error disappears”
Unit_Diag_Bit(24) = ”Hardware failure electronics”
Unit_Diag_Bit(25) = ”Hardware failure mechanics”
Unit_Diag_Bit(26) = ”Motor temperature too high”
Unit_Diag_Bit(27) = ”Electronic temperature too high”
Unit_Diag_Bit(28) = ”Memory error”
Unit_Diag_Bit(29) = ”Measurement failure”
Unit_Diag_Bit(30) = ”Device not initialized”
Unit_Diag_Bit(31) = ”Device initialization failed”
Unit_Diag_Bit(32) = ”Zero point error”
Unit_Diag_Bit(33) = ”Power supply failed”
Unit_Diag_Bit(34) = ”Configuration invalid”
Unit_Diag_Bit(35) = ”Restart”
Unit_Diag_Bit(36) = ”Coldstart”
Unit_Diag_Bit(37) = ”Maintenance required”
Unit_Diag_Bit(38) = ”Characteristics invalid”
Unit_Diag_Bit(39) = ”Ident_Number violation”
Unit_Diag_Bit(55) = ”Extension Available”
;-----------------------------------------------------------------
;
;Modules for Analog Input
Module
= ”Temperature (short) ” 0x94
EndModule
Module
= ”Temperature (long) ” 0x42, 0x84, 0x08, 0x05
EndModule
Hinweis:
Die fett gedruckten ”UNIT_DIAG_BIT”s sind realisierte Diagnosebits.
Note:
The semibold ”UNIT_DISG_BIT’s” are implemented diagnostic bits.