©
Siemens AG 2011
Safety Guidelines:
Warning notices must be observed to ensure personal safety as well as that of
others, and to protect the product and the connected equipment. These warning notices are
accompanied by a clarification of the level of caution to be observed.
Qualified Personnel:
This device/system may only be set up and operated in conjunction with this
manual. Qualified personnel are only authorized to install and operate this equipment in accordance with
established safety practices and standards.
Unit Repair and Excluded Liability:
•
The user is responsible for all changes and repairs made to the device by the user or the user’s
agent.
•
All new components are to be provided by Siemens Milltronics Process Instruments.
•
Restrict repair to faulty components only.
•
Do not reuse faulty components.
Warning:
Cardboard shipping package provides limited humidity and moisture protection. This product
can only function properly and safely if it is correctly transported, stored, installed, set up, operated, and
maintained.
This product is intended for use in industrial areas. Operation of this equipment in a residential area
may cause interference to several frequency based communications.
Note:
Always use product in accordance with specifications.
Copyright Siemens AG 2011. All Rights
Reserved
Disclaimer of Liability
This document is available in bound version and in
electronic version. We encourage users to purchase
authorized bound manuals, or to view electronic
versions as designed and authored by Siemens
Milltronics Process Instruments. Siemens Milltronics
Process Instruments will not be responsible for the
contents of partial or whole reproductions of either
bound or electronic versions.
While we have verified the contents of this
manual for agreement with the
instrumentation described, variations remain
possible. Thus we cannot guarantee full
agreement. The contents of this manual are
regularly reviewed and corrections are
included in subsequent editions. We welcome
all suggestions for improvement.
Technical data subject to change.
MILLTRONICS®is a registered trademark of Siemens Milltronics Process Instruments.
Contact SMPI Technical Publications
European Authorized Representative
at the following address:
Technical
Publications
Siemens
AG
Siemens
AG Industry
Sector
Siemens Milltronics Process Instruments
76181 Karlsruhe
1954 Technology Drive, P.O. Box 4225
Deutschland
Peterborough, Ontario, Canada, K9J 7B1
Email: [email protected]
•
For a selection of Siemens Milltronics level measurement manuals, go to:
www. siemens.com/processautomation
. Under Process Instrumentation, select
Level
Measurement
and then go to the manual archive listed under the product family.
•
For a selection of Siemens Milltronics weighing manuals, go to:
www. siemens.com/processautomation
. Under Weighing Technology, select
Continuous
Weighing Systems
and then go to the manual archive listed under the product family.
