Operate
6.2 Parameter description
SITRANS P500 with HART
Operating Instructions, 12/2014, A5E02344528-09
67
6.2
Parameter description
6.2.1
Overview of the menu structure
Parameters
For some parameters the units can be selected; this is valid for access both locally and via
HART.
In section "2.5 Display" (Page 108), a separate unit can be selected for the local
measurement view.
Layout
The main menu and the submenus available for selection form the menu structure. The main
menu comprises a total of six entries:
1
Quick start (Page 69)
4
Communication (Page 138)
2
5
3
6
Quick start
Use the "Quickstart" menu item to reach the "Commissioning" submenu. This submenu
offers you an opportunity to execute the main components of a start-up.
"1.1 Commissioning" (Page 69)
Setup
You use this menu and its submenus to adjust the device to the concrete rated conditions. It
offers more setting options than are available with a quick start. The quick start is a sub-set
of this menu.
2.1
Input
2.4
Service
2.2
Output
2.5
Display
2.3
Simulation
2.6
Mechanical Construction
Diagnostics
This menu is used to call up all the diagnosis values measured by the pressure transmitter
during operation and to configure the diagnostics functions.
3.1 Alarmlist
3.6
Operatinghours Counter
3.2 Identification
3.7
Slave pointer
3.3 Process Variables
3.8
Limiter
Summary of Contents for SITRANS P500
Page 1: ......
Page 2: ......
Page 10: ...Table of contents SITRANS P500 with HART 10 Operating Instructions 12 2014 A5E02344528 09 ...
Page 238: ......