manualshive.com logo in svg

Siemens SITRANS LG260, Operating Instructions Manual, Page: 46 / 96

Share
Download
Siemens SITRANS LG260 Operating Instructions Manual Download Page 46

46

PBD-51041059

SITRANS LG260 - Operating Instructions

44284-EN-171021

Note:

The setting of the instrument address can only be carried out online.

Select in the device catalogue "Driver" the option "USB", then under 

"Gateway" the option "Modbus Communicator". Double click these 

drivers for integration in the project tree. Move in the project tree to 

the symbol for the Modbus-Gateway. Select "Parameter", then "Online 

parameter adjustment" with the right mouse key and start the DTM for 

the Modbus electronics.
In the menu bar of the DTM, go to the list arrow next to the symbol for 

"Screwdriver". Select the menu item "Change address in the instru-

ment" and set the requested address.

In the device catalogue, select the option "Modbus Serial Driver" 

under "Driver". Double click on this driver and integrate it into the 

project tree.

Open the device manager on your PC and find out which COM inter

-

face the USB/RS 485 adapter is located on. Then go to the symbol 

"Modbus COM." in the project tree. Select "Parameter" with the right 

mouse key and start the DTM for the USB/RS 485 adapter. Enter the 

COM interface no. from the device manager under "Basic settings".
Select with the right mouse key "Additional functions" and "Instrument 

search". The DTM then searches for the connected Modbus partici-

pants and integrates them into the project tree. Now, in the project 

tree, go to the symbol for the Modbus gateway. Select with the right 

mouse key "Parameter", then "Online parameter setting" and start the 

DTM for the Modbus electronics.
In the menu bar of the DTM, go to the list arrow next to the symbol for 

"Screwdriver". Select the menu item "Change address in the instru-

ment" and set the requested address.
Then move again to the symbol "Modbus COM." in the project tree. 

Select with the right mouse key "Additional functions" and "Change 

DTM addresses

". Enter here the modified address of the Modbus 

gateway.

The instrument address is set in register no. 200 of the Holding 

Register (see chapter "Modbus register " in this operating instructions 

manual).
The procedure depends on the respective Modbus-RTU and the 

configuration tool.

7.4  Set up with the quick setup

The quick setup is another option for parameter adjustment of the 

sensor. It allows fast, convenient adjustment of the most important 

parameters to adapt the sensor quickly to standard applications. To 

use it, select the function "Quick setup" in the start screen.

Via PC through Modbus 

electronics

Via PC through RS 485 

cable

Via Modbus-RTU

General information

Summary of Contents for SITRANS LG260

































































































Reviews:

No comments