manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Operating Instructions Manual, Page: 30 / 90

Share
Download
Siemens SITRANS F M MAG 3100 Operating Instructions Manual Download Page 30

Sensors with PTFE liner

At delivery, the sensor is mounted with wooden blanks to hold the liner in place during 
transportation and storage. Do not remove the blanks until you are ready for installation. After 
only a few hours without the blanks, the liner creeps back towards its original shape. As a result, 
the installation is more difficult to carry out. 

Figure 4-12

Sensor with wooden blanks

Remove the blanks immediately before mounting the sensor

Figure 4-13

Removing wooden blanks

Sensors with PFA liner

NOTICE
Sharp objects can damage the liner

Do not use sharp objects to remove the blanks as this can damage the liner.

At delivery, the sensor is mounted with blanks to protect the liner during transportation and 
storage. 

Installing/Mounting
4.3 Mounting

SITRANS FM MAG 3100

30

Operating Instructions, 12/2021, A5E03005599-AE

Summary of Contents for SITRANS F M MAG 3100



























































































Reviews:

No comments