manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Operating Instructions Manual, Page: 29 / 90

Share
Download
Siemens SITRANS F M MAG 3100 Operating Instructions Manual Download Page 29

Transporting

WARNING

Lifting the sensor 

Do NOT lift the sensor by the terminal box. Do NOT use a forklift. If available lift the sensor by 
the lifting eyes fitted to the device. Otherwise lift the sensor by the process connections.

CAUTION

Flange devices ≤ DN 300

• Use carrying straps to transport devices with flange sizes smaller than DN 300.

• Wrap the carrying straps around both process connections when lifting the device.

• Chains should not be used, since these may damage the enclosure.

Figure 4-10

Incorrect transportation

Figure 4-11

Correct transportation

Removing the liner protectors

NOTICE
Sensors with PTFE or PFA liners only

The following information is only relevant for sensor types with PTFE or PFA liners. 

Installing/Mounting

4.3 Mounting

SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE

29

Summary of Contents for SITRANS F M MAG 3100



























































































Reviews:

No comments