Siemens SITRANS F C MC2 Operating Instructions Manual Download Page 29 | Manualshive

Page: 29 / 60

Siemens SITRANS F C MC2 Operating Instructions Manual Download Page 29

SITRANS F C MC2
Operating Instructions, 10/2009, A5E02154544-02

27

Maintenance and service

7

7.1

Maintenance

The device is maintenance-free, however a periodic inspection according pertinent directives

and regulations must be carried out.
An inspection can include check of:
●  Ambient conditions
●  Seal integrity of the process connections, cable entries, and cover screws
●  Reliability of power supply, lightning protection, and grounds

7.2

Transportation/storage

The sensor is a fragile piece of equipment. Impact and shock can

cause measuring inaccuracy. Therefore during transportation it

must be placed in the transportation box delivered by Siemens

Flow Instruments. If this is not possible, the alternative sensor

packaging must be able to withstand the hazards from

transportation.

7.3

Recalibration

Siemens Flow Instruments offers to recalibrate the sensor. The following calibrations are

offered as standard:
●  Standard calibration
●  Matched pair calibration
●  Customer specified matched pair calibration (up to 10 points)
●  Accredited matched pair calibration

Note
For recalibration the memory unit must always be returned with the sensor

«
...
27
28
29
30
31
...
»

Summary of Contents for SITRANS F C MC2





























































Reviews:

No comments