16
SFIDK.PS.028.S2.02
5.1
Connection safety information
Electrical connection
5
5.2
Connecting the multiple plug to the sensor
When connecting/disconnecting the pipes, the cable must be mechanically connected in order
to prevent the liquid from penetrating into the electrical multiple plug on the sensor.
Mount the multiple plug and tighten the glands for optimum sealing.
Warning
Tightness
Only when the cable is connected to the sensor, the IP67 protection is achived.
Warning
Installation in hazardous areas
When making electrical connections, observe the national statutes and provisions for hazardous
areas valid for the particular country.
E.g. in Germany these are:
•
Operational safety regulations
•
Directive for the installation of electrical systems in hazardous areas DIN EN 60079-14
(previously VDE 0165, T1) and EN 60079-25 (additional requirement for Zone 0)
Summary of Contents for SITRANS F C MASSFLO
