11
SFIDK.PS.028.S2.02
4.1
Safety information for installation
The SITRANS FC300 sensor can be installed for different areas of use.
Depending on area of application and system configuration, there may be differences in the
installation.
Installation
4
Warning
Protection against incorrect use of the measuring device.
Take particular care that the selected materials for the sensor pipes and the enclosure in contact
with the media are suitable for the process media used.
Ignoring this safety measure may cause injuries or life-threatening injuries to people and
damage the environment.
Warning
The device may only be used within the pressure and temperature range specified on the
nameplate.
Pressure overload might cause injuries and damage to people and the environment.
Warning
Category 1 equipment.
The FC300 may be installed in zone 0, zone 1 and zone 2.
Summary of Contents for SITRANS F C MASSFLO
