12
SFIDK.PS.028.S2.02
4.2
Location
The flowmeter can be located both indoors and outdoors, but the following conditions must be
observed:
Liquid temperature
The FC300 DN 4 is available in 2 temperature versions:
Standard version:
−
40 °C to + 115 °C
(−
40 °F to + 239 °F)
High temperature version:
−
40 °C to + 180 °C
(−
40 °F to + 356 °F)
For the high temperature version the multiple plug is raised from the sensor housing by a pipe,
as the maximum temperature of the plug is 125 °C (257 °F). It is possible to insulate the sensor
while still having access to the plug.
Important
.
When the liquid temperature and the ambient temperature differ too much, the sensor must be
insulated to prevent 2-phase flow causing possible loss of measuring accuracy. This applies
especially in applications with low flow.
The sensor must
always
be completely filled with a homogeneous liquid or gas in single phase,
otherwise measuring errors will occur.
Standard version
High temperature version
Summary of Contents for SITRANS F C MASSFLO
