9 Operation
Danger of accident!
Do not try to handle the Sitraffic Sensus Unit while driving.
The Sitraffic Sensus Unit does not have a power on or off switch. By connecting the
Sitraffic Sensus Unit to the power supply it starts to operate and shows the battery
symbol in the upper right of the display. In case the Sitraffic Sensus Unit is already
connected it starts:
• when the ignition is turned on or
• when the vehicle starts to move.
Further information about the operation can be obtained from web page www.siemens.com/
mobility-sensusunit-manuals
10 Removal
Disconnecting the power supply
Disconnect the power supply cable from the cigarette lighter. If the red cap of the cigarette
lighter cable is stuck in the socket you can remove it by inserting the connector back into the
socket, turning it clockwise about 90° and pull it out again.
Detaching Sitraffic Sensus Unit from the holder
Remove the Sitraffic Sensus Unit from the holder by releasing the latch on the upper side of the
holder and pulling the device out of the holder.
Demounting of the Sitraffic Sensus Unit holder
Finally remove the holder of the Sitraffic Sensus Unit.
If you have difficulties to remove the holder as a whole, release the suction cups one by one by
pulling the according flap.
Disposal
This appliance is marked in accordance with European Directive 2002/96/EC (waste
electrical and electronic equipment – WEEE). By proper disposal you prevent potential
consequences for the environment and human health. For detailed information re-
garding disposal of the device please ask
after-sales service of
your operating company
.
ENGLISH
Summary of Contents for Sitraffic Sensus Unit C3077
Page 2: ... ...
