Siemens SIRIUS 3RA Equipment Manual Download Page 92

Page: 92 / 166

Busbar adapters and device holders can be connected without tools. Link wedges simply need
to be plugged in on the rear of the adapters.

Figure 7-37

Connecting the adapters for mounting reversing contactor assemblies

The link wedges are included in the assembly kit for reversing operation, or they can be ordered
separately as accessories.

Adapting the busbar adapter to the busbar system

DANGER

Hazardous voltage!

Will cause death or serious injury.

Turn off and lock out all power supplying this device before working on this device.

The busbar adapter and the device holder can be adjusted to suit the following busbar
thicknesses:

• 5 mm (delivery condition)

• 10 mm

Mounting
7.3 Assembly and disassembly with different mounting systems

SIRIUS 3RA Load Feeders

Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004

Summary of Contents for SIRIUS 3RA







































































































































































Search results

Summary of Contents for SIRIUS 3RA

Reviews:

Brands by name

Popular brands

Siemens SIRIUS 3RA, Equipment Manual

Search results

Summary of Contents for SIRIUS 3RA

Reviews:

Brands by name

Popular brands