manualshive.com logo in svg

Siemens SIRIUS 3RA, Equipment Manual

Share
Download
Siemens SIRIUS 3RA Equipment Manual Download Page 88

7.3.3

On busbar system

All device combinations can be mounted on a 60 mm busbar system. Busbar adapters have to 
be used for busbar mounting. One adapter is required for direct-on-line starters; a pair of 
adapters is required for reversing contactor assemblies.       

Figure 7-32

Example of size S0 reversing starter with spring-loaded connection system mounted on 
busbar

The busbar adapters and the associated mounting parts can be purchased as accessories.

Component parts of the different mounting variants can be determined via our Online 
Configurator (Page 27).

Adapter types for busbars

Busbar adapters and device holders: Busbar adapters are available with or without pre-
assembled connecting cables. Busbar adapters without connecting cables are known as "device 
holders".

Busbar adapters and device holders are available in the adapter lengths 200 mm and 260 mm. 
All device combinations can be mounted on the long adapter. 

Size S2 is distinguished by width and by the number of pre-mounted DIN rails.

Mounting
7.3 Assembly and disassembly with different mounting systems

SIRIUS 3RA Load Feeders

88

Equipment Manual, 02/2022, A5E03656507520A/RS-AC/004

Summary of Contents for SIRIUS 3RA







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands