manualshive.com logo in svg

Siemens SINUMERIK 840D sl TCU 30.3, Manual

Share
Download
Siemens SINUMERIK 840D sl TCU 30.3 Manual Download Page 34

Supplementary conditions   

For operation of a TCU: 
● In the system network, the number of active TCUs is limited:

– a maximum of 2 TCUs: NCU 710.3 PN
– a maximum of 4 TCUs: NCU 720.3 PN or NCU 730.3 PN
– a maximum of 4 TCUs: PCU
Any number of TCUs can be operated in the system network. 

● CompactFlash Cards cannot be used on the TCU. 
● A 16 bit or 32 bit depth of color setting may be selected.
● If a PC keyboard is connected to the TCU, it is not possible to ensure that all special keys, 

e.g., multi-media keys, will be transferred to the software of the NCU / PCU.

● Machine control panels connected via a PROFIBUS network are not supported for 

switchover.

● Distributed memory media that are connected to the TCU via USB can be used.
● The TOP Panels must be networked on the basis of the Gigabit standard, e.g. Gigabit switch 

or Ethernet cable according to CAT 6 (or higher).

5.1.2

Settings for SINUMERIK solution line

Fundamentals   

The system network for SINUMERIK solution line is structured as a star topology with a central 

Ethernet switch, to which all Ethernet-based components of the system are connected.
For an NCU the connection is via the X120 Ethernet socket, for a PCU it is via the "Ethernet 

2" connection. There is no default for all other components with two Ethernet connections. 

These components have an internal 2-port switch and may be used to connect an additional 

operator component. Thus, in this case, there can be deviations from the strict star topology. 

System network   

In the system network, the IP address 192.168.214.xxx with subnet mask 255.255.255.0 is 

pre-selected. Here there is precisely one DHCP server with DNS that can run on one NCU or 

one PCU. The server ensures assignment of IP addresses to the Ethernet components in the 

system network (DHCP clients) from a specified address band. 

Networking
5.1 System settings

TCU 30.3

34

Manual, 09/2017, A5E40874197

Summary of Contents for SINUMERIK 840D sl TCU 30.3

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands