manualshive.com logo in svg

Siemens SINUMERIK 840D sl TCU 30.3, Manual

Share
Download
Siemens SINUMERIK 840D sl TCU 30.3 Manual Download Page 11

Description

2

2.1

Overview

A Thin Client Unit (TCU) allows the spatial separation between an operator panel (OP) / touch 

panel (TP) and the Panel Control Unit (PCU) / Numerical Control Unit (NCU). For this reason, 

the user interface is copied to one/several operator panel fronts, each with a TCU.

Validity

The description applies to the following TCU:

Designation

Article number

Thin Client Unit 30.3

6FC5312-0DA00-1AA1

Features

● Implementation of flat operator panels through the shallow installation depth and low power 

loss.

● Color depth: 32 bits
● 640 x 480 to 1280 x 1024 pixels
● Vibration-free mounting of the PCU in the control cabinet.
● Effective operation of larger machines.
● Signal transmission between PCU/NCU and operator panel via Industrial Ethernet    

The distance of the components is determined by the maximum distance between two 

network nodes / access points (100 m).

● The same operating screen is shown synchronously on all operator panel fronts and can 

be operated from all operator panel fronts.

● The operation on an operator panel front connected via TCU has the same access rights 

as the operation on an operator panel front connected directly to the PCU.

● The mixed operation of operator panel fronts connected via TCU and an operator panel 

front connected directly to the PCU is possible.

● With restrictions to the interfaces (see Section "Operating the menu for a new TCU or 

replacement TCU (Page 60)"), the TCU 30.3 is compatible to the previous models and 

therefore mixed operation is possible.

Preconditions

● NCU 7x0
● Operator panel fronts:

– OP 010, OP 010C, OP 010S, OP 012, OP015, OP 015A, TP 015A, OP 019

TCU 30.3

Manual, 09/2017, A5E40874197

11

Summary of Contents for SINUMERIK 840D sl TCU 30.3

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands