PLC Subroutines Manual
22
6FC5397-0FP40-0BA0, 08/2013
Select the TCP/IP pointed to the Ethernet card of your PC, and then click the
button.
You can find the name of your Ethernet card under "Start" > "Settings" > "Network
connections" on your PC.
3.
On the left side of the communication setting window, enter the IP address for the
corresponding SINUMERIK 808D ADVANCED control.
●
When you select "Yes" for the DHCP on the control, enter the IP address that is already
automatically assigned.
●
When you select "No" for the DHCP on the control, enter the IP address that you've
previously entered on the control manually.
4.
Double click this icon on the right side of the communication setting window to establish a
connection to the specified IP address.
Note
●
Before configuring communications in the PLC Programming Tool, make sure the connection must be already enabled
on the control.
2.9
PLC application Download/Upload/Copy/Compare
You can save, copy or over-write a PLC project or PLC application on the control system by using the following:
●
PLC Programming Tool
●
USB stick
The PLC project contains the PLC user program, including all of the important information (symbols, comments, ...).
You can upload / download a PLC project from / to the control system with the PLC Programming Tool. Also with this tool,
you can import and export the PLC project in the ".pte" format. Additionally, you can read / write the PLC project in the ".pte"
format from / to a USB stick directly on the control system.
