Siemens Sinteso FD20 Product Data Download

Page: 148 / 152

Test units and accessories
LE3 Test lamp

148 | 152

008164_y_en_--

11.12 LE3 Test lamp

The test lamp LE3 is used to test the function of all flame detectors over distances

up to 10 m. It is housed in a transportable case together with the required

accessories. In addition, the case enables the test lamp to be kept in a dust-free

condition.
The quartz-halogen lamp used creates an intense ray of light. This helps to align

the lamp on the detector which is to be tested. During the detector test, the ray of

light is modulated. The luminous intensity can be set in accordance with the

distance.
The power is supplied by a rechargeable battery. Since the color of the light

depends on the charge state of the battery, it must always be charged in buffer

mode. A special charger is available for this.

WARNING

Use of test lamps in areas at risk of explosion
Risk of explosion

●

Do not use the test lamp LE3 in areas at risk of explosion.

Summary of Contents for Sinteso FD20

























































































































































Search results

Summary of Contents for Sinteso FD20

Reviews:

Related manuals for Sinteso FD20

Brands by name

Popular brands

Siemens Sinteso FD20, Product Data

Search results

Summary of Contents for Sinteso FD20

Reviews:

Related manuals for Sinteso FD20

Brands by name

Popular brands