6
Building Technologies
A6V10331032_j_en_--
Fire Safety
2019-01-24
Reset button
Use the reset button to reset all of the detector's status indicators. These indicators can refer
to fire alarms or airflow events. Resetting the fire alarm also resets the associated relay.
If the detector is operated on the FDnet/C-NET, the alarms and the associated relays are
not reset.
USB connection
You can use a mini USB cable to connect the detector to a Windows PC. To set up the
detector, use the configuration tool 'FXS2051 ASD Configuration Tool'.
Test function LED
Hold the 'Buzzer silence' button down for 5 seconds. The LEDs on the display are tested
with 3 different brightness settings.
If the aspirating smoke detector is to be operated on the FDnet/C-NET, the communication
interface FDCC221S (S24218-A201-A2) must be ordered separately.