manualshive.com logo in svg

Siemens Sinteso Cerberus PRO FDA221, Manual, Page: 12 / 12

Share
Download
Siemens Sinteso Cerberus PRO FDA221 Manual Download Page 12

12
Building Technologies

A6V10331032_j_en_--

Fire Safety

2019-01-24

Issued by

Siemens Switzerland Ltd

Building Technologies Division

International Headquarters

Theilerstrasse 1a

CH-6300 Zug

Tel. +41 58 724 2424

www.siemens.com/buildingtechnologies

© Siemens Switzerland Ltd, 2013

Technical specifications and availability subject to change without notice.

Document ID

A6V10331032_j_en_--

Edition

2019-01-24

FDAZ292

73

95

214

174.2

74

5

0786

Siemens Schweiz AG; Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

A6V10334410

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EU Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or http://siemens.com/bt/download

13

FDA221 / FDA241 - Aspirating smoke detector for use in fire detection and fire alarm systems installed in buildings.

305/2011/EU (CPR): EN 54-20 / EN 54-17 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-21270; DoC No.: CED-FDA221/FDA241

FDA221 / FDA241

0786

Siemens Schweiz AG, Theilerstrasse 1a

CH-6300 Zug

Technical data: see doc.

A6V10334410

The declared performance and conformity can be seen in the Declaration of Performance (DoP) and the EC Declaration of Conformity (DoC),

which is obtainable via the Customer Support center: Tel. +49 89 9221-8000 or https://siemens.com/bt/download

13

FDCC221S - Input/output device incl. short-circuit isolator for use in fire detection and fire alarm systems installed in buildings.
305/2011/EU (CPR): EN 54-17 / EN 54-18 ; 2014/30/EU (EMC): EN 50130-4 / EN 61000-6-3 ; 2011/65/EU (RoHS): EN 50581

DoP No.: 0786-CPR-21270; DoC No.: CED-FDA221/FDA241

FDCC221S

Summary of Contents for Sinteso Cerberus PRO FDA221













Reviews:

No comments