9.7.10
Replacing the TP900 operator panel
To replace the operator panel, proceed as follows:
1. Disconnect the cabinet from the power supply.
2. Open the cabinet.
3. Remove the SD card from the data slot.
Figure 9-13
Remove the operator panel.
4. Release the cables
②
at the operator panel.
5. Remove the screws
①
(9 x) of the fastening clips. Remove the mounting clips. Withdraw the
operator panel from the cabinet door towards the front.
6. Fit a new operator panel. Fasten the operator panel.
7. Connect the cables.
Maintenance
9.7 Repair
SINAMICS SH150 6SL3805
Operating Instructions 05/2020
113
Summary of Contents for SINAMICS SH150
