Siemens SINAMICS DCM 6RN, Reference Manual

Page: 13 / 30

2.3 Function tests
The drive functions are tested according to IEC 61800-5-1. In addition, excerpts from additional
standards apply, which are listed in the relevant chapters as well as internal Siemens directives
within the scope of quality assurance.
The function tests are performed and documented in the Siemens test field by internal test field
personnel. For the function test, the drive is in the test mode with restricted monitoring functions.
The successful test is confirmed in a 3.1 certificate – or in the case that the customer has
ordered the acceptance test, in a 3.2 certificate.
See also
Function test (Page 20)
General scope of services
2.3 Function tests
SINAMICS DCM 6RN F03
Reference Manual Rev.201902141527 SINAMICS DCM
13