manualshive.com logo in svg

Siemens SINAMICS CONNECT 500, Operating Instructions Manual

Share
Download
Siemens SINAMICS CONNECT 500 Operating Instructions Manual Download Page 48

Additional information

Additional information about establishing a connection to the CU is provided in the operating 

instructions of the converter and the CU. Additional information about the connectivity module 

version that can be retrofitted is provided in the Internet (

https://support.industry.siemens.com/

cs/ww/en/ps/25291

).

See also

Standard topology (Page 53)

9.7.3

Activating FTP on the Control Unit

Use the "STARTER" commissioning software to activate FTP on the converter Control Unit.

Procedure

1. Open the "STARTER" application.
2. Open the expert list of the Control Unit.
3. Activate parameter "p8908" / "Activate FTP".
4. Set the online value to "[1] Yes". 
5. Click on "Copy from RAM to ROM".
6. Save the settings.

Note
The FTP server is immediately activated.
The FTP server is only deactivated after the Control Unit is restarted.

Maintenance
9.7 Fault rectification

SINAMICS CONNECT 500

46

Operating Instructions, 10/2019

Summary of Contents for SINAMICS CONNECT 500





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands