Siemens SIMOTICS M-1PH8, Operating Instructions Manual

Page: 111 / 186

Commissioning
6.2 Checklists for commissioning
1PH808/1PH810 main motors
Operating Instructions, 04/2017, 610.48004.40f
111
Table 6- 2 Checklist (2) – checks regarding the mechanical system
Check OK
Have all touch protection measures for moving and live parts been taken?
Has the motor been correctly mounted and aligned?
Can you rotate the rotor without it touching the stator?
Do the operating conditions correspond to the data specified on the rating plate?
Are all mounting screws, connecting elements, and electrical connections tight and
attached properly?
Do the output elements have the correct setting conditions according to type?
Examples:
• Have the couplings been aligned and balanced?
•
Has the tension of a belt drive been correctly adjusted?.
•
Have the gear tooth flank and gear tooth tip play as well as radial play been
correctly adjusted for geared outputs?
Table 6- 3 Checklist (3) – checks regarding the electrical system
Check OK
Has the motor been connected so that it rotates in the specified direction?
Have the minimum insulation resistance values been maintained?
Have the grounding and equipotential bonding connections been correctly
established?
Do the brakes function perfectly?
Table 6- 4 Checklist (4) – checks regarding monitoring devices
Check OK
Has it been ensured that speeds no higher than the maximum speed n
max
can be
reached (is the drive speed limited)?
Have all supplementary motor monitoring devices and equipment been correctly
connected – and are they functioning correctly?