manualshive.com logo in svg

Siemens SIMEAS P 7KG7550, Operating Instructions Manual, Page: 3 / 52

Share
Download
Siemens SIMEAS P 7KG7550 Operating Instructions Manual Download Page 3

 

2

The warnings and information contained in these 

operating instructions are provided 

to ensure personal safety and maximize the useful 

life of the product.  

Please follow them!

 

This product is UL-certified to Standard UL 61010B-1, based 
on the specification stated in Chapter 1.10 (Technical Data). 
UL File No.: E228586 

 

 
Measuring Equipment 
 
             2UD1 

 

Note: 
This equipment has been tested and found to comply with 
the limits for a Class A digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of the 
equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to 
correct the interference at his own expense. 

Summary of Contents for SIMEAS P 7KG7550





















































Reviews:

No comments