SIMATIC RTLS4060T
8
Manual, 06/2019, C79000-G8976-C550-02
3
Installation, commissioning, safety
3.1
General information
•
The devices can only be used in conjunction with the Locating Manager.
•
The setup, assembly and use of the tools and clients of the localization system are described in
the relevant guides and manuals.
3.2
Installation and operation
•
Before installing the device, read carefully through all points in "3. Installation, commissioning,
safety" to guarantee proper installation and operation.
•
The device is intended for installation in a vehicle.
•
Installation of the device must be performed by appropriately qualified and trained specialist
personnel according to the installation instructions.
•
The notes on the environmental conditions must be observed during installation and operation
of the devices.
•
The ambient temperature of the device must not exceed 50 °C. Avoid installation locations
exposed to direct sunlight.
•
The devices must be installed in accordance with the respective instructions for the installation
of electrical systems and utilities.
3.3
Connection of the cable
Make sure the wiring is correct before switching on the device.
3.4
Recycling and disposal
The products are low in harmful substances, can be recycled and meet the requirements of the
Directive 2012/19/EU for disposal of waste electrical and electronic equipment (WEEE).
Do not dispose of the products at public disposal sites.
For environmentally compliant recycling and disposal of your electronic waste, please contact a
company certified for the disposal of electronic waste or your Siemens representative.
Note the different national regulations.
