background image

 

 

SIMATIC RTLS4060T 

12

 

Manual, 06/2019, C79000-G8976-C550-02 

 

5.3

 

RED

 

5.3.1

 

Protection of health and safety 

The products described in this document meet the requirements of the applied standards: 

Article 3 (1) a) Protection of health and safety 

 

EN 62368-1 
Equipment for audio/video, information and communication technology – Part 1: Safety 
requirements 

 

EN 62311 
Assessment of electronic and electrical equipment related to human exposure restrictions in 
electromagnetic fields (0 Hz - 300 GHz) 

The products described in these operating instructions meet the requirements of EU directive 
2014/30/EU "Electromagnetic Compatibility" according to the designated standards for the 
following areas of application: 
Art. 3 (1) b) EMC: 

 

ETSI EN 301 489-1 
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic 
compatibility for radio equipment and services - Part 1: Common technical requirements 

 

ETSI EN 301 489-17 
Electromagnetic compatibility and radio spectrum matters (ERM) - Electromagnetic 
compatibility for radio equipment and services - Part 17:  
Specific conditions for broadband data transmission systems 

 

EN 55011 
Industrial, scientific and medical (ISM) radio-frequency equipment – Electromagnetic 
disturbance characteristics – Limits and methods of measurement 

 

EN 55032 Class A, Class B 
Electromagnetic compatibility of multimedia equipment – Emission requirements 

 

EN 55035 
Electromagnetic compatibility of multimedia equipment - Immunity requirements 

 

EN 61000-6-1 
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, 
commercial and light-industrial environments 

 

EN 61000-6-2 
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial 
environments 

 

EN 61000-6-3 
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for 
residential, commercial and light-industrial environments 

Summary of Contents for SIMATIC RTLS4060T














Reviews: