6-2
PG 720 P Programming Device
C79000-G7076-C721-02
6.1
Changing the Device Configuration with SETUP
Your PG 720 device configuration is set for working with the software
supplied with the unit. You should only change the preset values if you have
modified your PG 720 in any way or if a fault occurs when the unit is
powered up.
The SETUP program is in the ROM-BIOS. Information about the system
configuration is stored in the battery-backed RAM of the PG 720.
You can use SETUP to set the hardware configuration (for example, hard
disk type) and define the system characteristics. You can also use SETUP to
set the time of day and date.
If incorrect SETUP data are detected when you boot the system, the BIOS
prompts you to:
Start SETUP by pressing F2 or
Continue booting by pressing F1.
On completion of the startup test, the BIOS gives you the opportunity of
starting the SETUP program by displaying the following screen prompt:
PRESS
<
F2
>
to enter SETUP
To start SETUP, proceed as follows:
1. Reset your PG 720 (warm or cold restart).
2. Press the F2 key as long as the BIOS prompt appears on the screen.
The various menus and submenus are listed on the following pages. You can
get all the information you need for the SETUP entry selected from the
“Item Specific Help” part of the relevant menu.
Changing the
Device
Configuration
SETUP
Program
Incorrect SETUP
Data
Starting SETUP
SETUP Menus
Configuring the PG 720
