2-5
PG 720 P Programming Device
C79000-G7076-C721-02
When the keyboard is attached to the unit, its angle of inclination is 6
°
, the
height of the middle row of keys is 30 mm (about 1 inch). When it is
detached, the angle of inclination is 4.5
°
, and the height of the middle row of
keys is 27 mm. This is an ideal ergonomic design to allow a comfortable
working position.
If no table or desk is available, the unit can be operated on the floor. You can
adjust the casing and display through approximately 90
o
into the horizontal
plane.
CD-ROM drive
Stand
Pivot
Support
Extra support hoop
Figure 2-4 Horizontal Operating Position Without Keyboard
The basic unit can be attached to a wall. Four drilled holes (6 mm diameter)
are provided in the unit stand for this purpose.
267
46
ø6
Figure 2-5
Drilling Template for Wall Mounting (dimensions in millimeters)
Keyboard Angle
Horizontal
Position
Adjustment
Wall Mounting
Unpacking and Setting Up the PG 720
