1-29
SIMATIC PC BI45/FI45 PII, Technical Description
C79000-G7076-C794-03
1.4.13
Removing and Installing the Membrane Keyboard or Front
Components of the FI45
After the device has been installed, the membrane keyboard or front
components can be exchanged from the front. Proceed as follows:
Close the application you are using.
Open the cover of the disk drive and remove the diskette or CD-ROM.
Pull out the mains connector.
Release the 10 screws with which the membrane keyboard is fastened to
the front frame.
Grip the cover of the disk drive carefully and pull the membrane
keyboard forwards and off.
!
Caution
There is nothing to prevent the keyboard from falling.
Unplug the 40-pin connector from the front adapter module and
disconnect the interface cable carefully from the display.
Remove the membrane keyboard and the front components mounted on it.
To install the membrane keyboard, proceed in reverse order.
System Unit
