Siemens SIMATIC NET SCALANCE XB-200 Series, Operating Instructions Manual

Page: 75 / 78

Figure A-1 FDA and IEC approvals
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
Mechanical stability (in operation)
Device IEC 60068-2-27 shock IEC 60068-2-6 vibration
15 g, 11 ms duration
6 shocks per axis
10 - 58 Hz: 0.075 mm
85 - 150 Hz: 1 g
1 octave/min, 20 sweeps
SCALANCE XB208 ● ●
SCALANCE XB205-3 ● ●
SCALANCE XB205-3 (LD) ● ●
SCALANCE XB205-3 (ST) ● ●
SCALANCE XB216 ● ●
SCALANCE XB213-3 ● ●
SCALANCE XB213-3 (LD) ● ●
SCALANCE XB213-3 (ST) ● ●
Installation guidelines
The devices meet the requirements if you adhere to the installation and safety instructions
contained in this documentation and in the following documentation when installing and
operating the devices.
● "Industrial Ethernet / PROFINET Industrial Ethernet" System Manual (
https://
support.industry.siemens.com/cs/ww/en/view/27069465 )
● "Industrial Ethernet / PROFINET - Passive Network Components" System Manual ( https://
support.industry.siemens.com/cs/ww/en/view/84922825 )
● "EMC Installation Guidelines" configuration manual ( https://support.industry.siemens.com/
cs/ww/en/view/60612658 )
WARNING
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their target
systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
Approvals
SCALANCE XB-200
Operating Instructions, 03/2020, C79000-G8976-C359-09
75