Connecting up
4.2 Suitable cables for the SCALANCE W786
SCALANCE W786-2HPW
Operating Instructions (Compact), 06/2007, A5E01186485
29
4.2
Suitable cables for the SCALANCE W786
Cable specification
The following table lists the requirements for a cable depending on the use case.
Application
Specification
Direct 48 V DC supply
•
Round cable cross-section with 6 to 8 mm
diameter.
•
Permitted tensile load at least 100 N.
Power supply adapter 12 - 24 V DC
•
Round cable cross-section with 6 to 8 mm
diameter.
•
Permitted tensile load at least 100 N.
Power supply adapter 110 - 230 V AC
•
Round cable cross-section with 6 to 8 mm
diameter.
•
Three-core cable with 0.5 - 1.5 mm
2
cross
section of the individual cores.
•
Permitted tensile load at least 100 N.
Ethernet
IE FC TP Standard Cable GP 2 x 2 (type A)
Order no. 6XV1 840-2AH10
IE TP Torsion Cable 2 x 2 (type C)
Order no. 6XV1 870-2F
IE FC TP Trailing Cable 2 x 2 (type C)
Order no. 6XV1 840 3AH10
Multimode FO cable
FO Standard Cable GP
Order no. 6XV1 873-2A
Minimum bending radius 65 mm.
You will find detailed information on
preassembled cable lengths and connectors in
the catalog "IK PI".
Antenna connector: N-Connect/R-SMA connecting cable
The N-Connect/R-SMA male/male flexible connecting cable is available as an accessory for
direct connection of an antenna to a SCALANCE W-700.
Length in m
Order number
1
2
5
10
6XV1875-5CH10
6XV1875-5CH20
6XV1875-5CH50
6XV1875-5CN10
