Mounting
3.4 Mounting with mounting plate
SCALANCE W786-2HPW
Operating Instructions (Compact), 06/2007, A5E01186485
23
3.4.5
Fitting the mounting plate to a mast
Procedure
B
A
Figure 3-12 Mounting plate with fittings for mast mounting
Follow the steps below to fit the mounting plate to a mast:
1. Feed the fastening straps through the openings in the mounting plate (position A in the
figure above).
2. Place the fastening straps around the mast at the required position.
3. Feed the free end of the strap through the quick-release fastener. You can twist the
tensioning screw (position B in the figure above) to the side to adapt a fastening strap to
the diameter of the mast.
4. Press the tensioning screw against the fastening strap and tighten the tensioning screw,
tightening torque 4.5 Nm.
