Siemens SIMATIC NET RUGGEDCOM RSL910, Installation Manual

Page: 12 / 52

Introduction
1.2 Description
2
1
3
4
5
6
7
8
9
10
1
POWER LED
2
ALARM LED
3
USB Console Port
4
[Optional] SFP (100/1000Base-TX/FX/SX/LX) Ethernet Ports
5
Copper (10/100Base-TX) Ethernet Ports
6
Universal EoVDSL Terminal
7
RS232 Console Port (Serial)
8
Failsafe Alarm Relay
9
Chassis Ground Connection
10
Power Supply Terminal Block
Figure 1.1 RUGGEDCOM RSL910
POWER LED Illuminates green during boot up and when power is supplied to the
device.
ALARM LED Illuminates red when an alarm condition exists.
Console Ports The console ports (serial and USB Type-B) are for interfacing directly
with the device and accessing initial management functions. For
information about connecting to the device via the serial console
port, refer to "Connecting to the Device (Page 19)" .
Communication Ports Communication ports in general receive and transmit data, as
well as provide access to the RUGGEDCOM ROS Web interface.
For more information about the various ports available, refer to
" Communication Ports (Page 23)" .
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 13)"
• "Failsafe Alarm Relay Specifications (Page 32)"
Power Supply Terminal Blocks Pluggable terminal blocks for connecting one or more power
sources. For more information, refer to "Connecting Power (Page
13)" and "Power Supply Specifications (Page 31)" .
RUGGEDCOM RSL910
Installation Manual, 04/2022, C79000-G8976-1305-13
3