manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM RSL910, Installation Manual

Share
Download
Siemens SIMATIC NET RUGGEDCOM RSL910 Installation Manual Download Page 11

Introduction
1.2 Description

Ethernet Over VDSL (EoVDSL)

• 2 x Ethernet over VDSL2 (EoVDSL) ports
• Up to 3 km (1.8 mi) LAN segments
• Symmetric data rates up to 140 Mbps
• Automatically selects fastest data rate based on distance and quality of cable
• Software selectable to be master or slave
• Frequency Division Multiplexing (FDM)

Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• -40 to 85 °C (-40 to 185 °F) ambient operating temperature (no fans)
• 20 AWG Galvanized Steel
• DIN or panel mounting options provide secure mechanical reliability
• [Optional] Conformal coated printed circuit boards

Power Supply

• Fully integrated power supply
• Universal high-voltage range:

• 125-250 VDC or 100-240 VAC (Hazardous Environments)
• 88-300 VDC or 85-264 VAC (Non-Hazardous Environments)

• Dual LO DC inputs: 24 or 48 VDC
• Terminal blocks for reliable maintenance free connections
• CSA/UL 62368-1 safety approved to 85 °C (185 °F)

1.2

Description

The RUGGEDCOM RSL910 features various ports, controls and indicator LEDs on the

front panel for connecting, configuring and troubleshooting the device.

2

RUGGEDCOM RSL910

Installation Manual, 04/2022, C79000-G8976-1305-13

Summary of Contents for SIMATIC NET RUGGEDCOM RSL910





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands