Introduction
1.2 Description
2
5
8
3
1
4
7
6
1
Serial Ports
2
Fiber Optic Ethernet and/or BNC (Optional) Ports
3
Port Status Indicator LEDs
4
Display Mode Indicator LEDs
5
Mode Button
6
Alarm Indicator LED
7
Power Module Indicator LEDs
8
RS-232 Serial Console Port (RJ45)
Figure 1.1
RUGGEDCOM RS416F
Communication Ports
Ports for communicating with other devices or accessing the
RUGGEDCOM RUGGEDCOM RS416F operating system are described
in
Port Status Indicator LEDs
Port status indicator LEDs indicate the operational status of each
port, dependent on the currently selected mode.
Description
Mode
Color/State
Ethernet Ports
Serial Ports
Green (Solid)
Link detected
—
Green
(Blinking)
Link activity
Traffic
detected
Status
Off
No link
detected
No traffic
Green (Solid)
Full duplex mode
Orange
(Blinking)
Half duplex mode
Duplex
Off
No link detected
Green (Solid)
100 Mb/s
>19200 to
<57600 bps
Green
(Blinking)
—
57600 bps or
higher
Orange (Solid) 10 Mb/s
<19200 bps
Speed
Off
No link detected
Display Mode Indicator LEDs
The display mode indicator LEDs indicate the current display mode
for the port status indicator LEDs (i.e. Status, Duplex or Speed).
Mode button
The
Mode
button sets the display mode for the port status indicator
LEDs (i.e. Status, Duplex or Speed). It can also be used to reset the
device if held for 5 seconds.
Alarm Indicator LED
The alarm indicator LED illuminates when an alarm condition exists.
RUGGEDCOM RS416F
Installation Manual, 04/2021, C79000-G8976-1354-04
3
