manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM M969, Installation Manual

Share
Download
Siemens SIMATIC NET RUGGEDCOM M969 Installation Manual Download Page 29

Communication Ports
4.1 Copper Ethernet Ports

2

1

     1    

RJ45 Copper Ethernet Ports

     2    

Fiber Optic Ethernet Ports

Figure 4.2

Port Assignment (RJ45 Connectors Shown)

4.1

Copper Ethernet Ports

The RUGGEDCOM M969 supports eight 10/100Base-TX Ethernet ports that allow

connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables

with RJ45 male connectors or M12 male connectors. The RJ45/M12 connectors are

directly connected to chassis ground on the device and can accept CAT-5 shielded

twisted-pair (STP) cables.

WARNING

Electric shock hazard – risk of serious personal injury and/or equipment

interference

If shielded cables are used, make sure the shielded cables do not form a ground loop

via the shield wire and the RJ45/M12 receptacles at either end. Ground loops can

20

RUGGEDCOM M969

Installation Manual, 01/2021, C79000-G8976-1039-03

Summary of Contents for SIMATIC NET RUGGEDCOM M969

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands