manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM M969, Installation Manual

Share
Download
Siemens SIMATIC NET RUGGEDCOM M969 Installation Manual Download Page 19

Installing the Device
2.2 Mounting the Device

IMPORTANT

If any item is missing or damaged, contact Siemens for assistance.

2.2

Mounting the Device

The RUGGEDCOM M969 is designed to be mounted on a panel by affixing the top

and bottom flanges of the device to a panel using screws.

IMPORTANT

Heat generated by the device is channeled outwards from the enclosure. As such, it

is recommended that 2.5 cm (1 in) of space be maintained on all open sides of the

device to allow for some convectional airflow.
Forced airflow is not required. However, any increase in airflow will result in a

reduction of ambient temperature and improve the long-term reliability of all

equipment mounted in the rack space.

Note

For detailed dimensions of the device with panel mount hardware installed, refer to

"Dimension Drawings (Page 25)"

.

10

RUGGEDCOM M969

Installation Manual, 01/2021, C79000-G8976-1039-03

Summary of Contents for SIMATIC NET RUGGEDCOM M969

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands