manualshive.com logo in svg

Siemens SIMATIC NET RUGGEDCOM M969, Installation Manual

Share
Download
Siemens SIMATIC NET RUGGEDCOM M969 Installation Manual Download Page 11

Introduction
1.2 Description

• Failsafe output relay for critical failure or error alarming

Universal Power Supply Options

• Fully integrated power supply
• Universal high-voltage range: 88-300 VDC or 85-264 VAC.
• Popular low-voltage DC ranges: 12, 24, 48 VDC
• Dual redundant, parallel load-sharing power supplies (option)
• Can be powered from different sources for ultimate redundancy
• Available with M23 style connectors
• CSA/UL 62368-1 safety approved to 85 °C (185 °F)

Simple Plug and Play Operation

• Automatic learning of up to 8192 MAC addresses
• Auto-negotiation on all 10/100Base-TX ports, 100FX on optic fiber ports
• Auto-MDI/MDIX (crossover) on all 10/100Base-TX ports
• LED indicators for link and activity

1.2

Description

The RUGGEDCOM M969 features various ports, controls and indicator LEDs for

connecting, configuring and troubleshooting the device.

2

RUGGEDCOM M969

Installation Manual, 01/2021, C79000-G8976-1039-03

Summary of Contents for SIMATIC NET RUGGEDCOM M969

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands