Certification
6.1.2 ATEX/IEC Ex
•
ANSI/ISA-12.12.01-2007
Non-incendive Electrical Equipment For Use In Class 1 And 2, Division 2 And Class
3, Divisions 1 And 2 Hazardous (classified) Locations
The device is marked with a CSA symbol that indicates compliance with both
Canadian and U.S. requirements.
C
US
Copies of the CSA Declarations of Conformity are available via Siemens Industry
Online Support:
•
https://support.industry.siemens.com/cs/ww/en/view/109476357
(General
Safety)
•
https://support.industry.siemens.com/cs/ww/en/view/109476358
(Hazardous
Locations)
6.1.2
ATEX/IEC Ex
This device meets the requirements of the following ATEX/IEC Ex standards:
•
IEC/EN 60079-15:2005
Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, Test
and Marking of Type of Protection "N" Electrical Apparatus
It is specifically approved for use in hazardous locations defined as:
• EEx nC IIC T4
• Ex II 3 G
• 12-24 VDC, 2A, Class III
6.1.3
European Union (EU)
This device is declared by Siemens AG to comply with essential requirements and
other relevant provisions of the following EU directives:
•
EN 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity
for Industrial Environments
•
EN 60825-1
Safety of Laser Products – Equipment Classification and Requirements
•
EN 50581
Technical Documentation for the Assessment of Electrical and Electronic
Products with Respect to the Restriction of Hazardous Substances
24
RUGGEDCOM i800
Installation Manual, 01/2021, C79000-G8976-1002-06
