Siemens SIMATIC NET CP 1515 Manual Download Page 88

Page: 88 / 94

Industrial Ethernet Wireless LAN CP 1515

C79000-G8976-C169-01

,QVWDOODWLRQIRU:LQGRZV 17

' ,QWURGXFWLRQ

Unlike most versions of MS-Windows, Windows NT 4.0 does not support
“Plug & Play” and “Hot Swapping” of PC Cards:

•

In order to start the driver installation for your PC Card, you will need to
“introduce” the card to the operating system.

•

To insert or remove PC Cards, Windows NT machines typically require
you to restart the computer in order to recognize the card and load the
drivers.

The Windows NT operating system also identifies user profiles (accounts)
that are associated with dedicated levels of authority (privileges) like the
ones listed below:

•

Users - are allowed to change the visual appearance of the Windows NT
desktop and user-defined preferences.

•

Power Users - can create “User Accounts” or “User Groups”

•

Administrators - can manage and control the overall configuration of the
workstation.

Summary of Contents for SIMATIC NET CP 1515































































































Search results

Summary of Contents for SIMATIC NET CP 1515

Reviews:

Related manuals for SIMATIC NET CP 1515

Brands by name

Popular brands

Siemens SIMATIC NET CP 1515, Manual

Search results

Summary of Contents for SIMATIC NET CP 1515

Reviews:

Related manuals for SIMATIC NET CP 1515

Brands by name

Popular brands