:LQGRZV2SHUDWLQJ6\VWHPV
Industrial Ethernet Wireless LAN CP 1515
C79000-G8976-C169-01
73
If the default SIMATIC NET IWL
I/O Port has already been assigned to
another device, select an alternative I/O Port value from the range listed
below:
The default setting is 0400.
2. Verify that the alternative value is available (i.e. not listed in the Windows
NT Diagnostics window).
3. Write down the alternative I/O Port value and close the Windows NT
Diagnostics Program. Having finished these steps, you should now have
a note that identifies the following (alternative) values:
•
IRQ value
•
I/O Port Address
You can use these values to install the SIMATIC NET IWL
Miniport Driver
as described later in this chapter.
0200
0300
0400
0500
0600
0700
-
-
0440
0540
0640
0740
0280
0380
0480
0580
0680
0780
-
-
04C0
05C0
06C0
07C0